Brand new and high quality
Easy to operate
Check the wiring errors of 5E & 6E coaxial cable and telephone line, including open circuit, short circuit, jumper wire, reverse connection and cross-talk interference
Find the location of wiring or connection error
Measure the length of cable, and find the location of open circuit and short circuit
Dynamically calibrate cable length to increase the accuracy of length measurement up to 97%
Large LCD display for easy reading
Eassy to carry
Automatic delay shut-off
Measure length and pairing, whether the far-end recognizer plugged or not
Locate cable, 8 far-end passive jacks (ID No. ID1-ID8)
With voice reminder for far-end recognizer
Automatically compensate any change in battery capacity or ambient temperature

LCD: 4 x 16 characters (visible dimension: 61.6 x 25.2 mm)
Application: STP / UTP twin twisted cable, coaxial cable, telephone line
Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R)
The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line

Length measurement of twin twisted cable:
Scope : 1350M (31,200 FT)
Calibration accuracy : 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)
Shipment accuracy : 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)
Display : M or FT

Length calibration: User can set calibration factor by himself by a given length cable. The length of calibrating cable is more than 5m.
Working temperature: -10°C to 60°C
Powered by 4 AA batteires (NOT included)
Dimension: 180 x 80 x 40 mm 

Paquete incluído:
1 X Network tester
1 X User manual